Radial 7 AutoMoto Light (Pair)
Radial 7 AutoMoto Light (Pair)
Radial 7 AutoMoto Light (Pair)

Radial 7 AutoMoto Light (Pair)

5700 Lumens 
  • In stock
  • Inventory on the way
£900.00 GBP
£900.00 GBP
Shipping calculated at checkout.
Description

The Radial7 is a 5,700 lumen auxiliary light for adventure and touring motorcycles, designed and built in West Sussex. That output figure is measured from the front of the light rather than added up from LED datasheet claims, which is why it looks conservative next to some competitors quoting theoretical numbers.

It connects to your motorcycle's LIN bus and runs off the switchgear you already have. There is no relay to mount, no fuse tap, no aftermarket switch pod and no loom taped under the tank. Brightness, mode and colour changes happen through the bike's own controls with no lag. On supported bikes, fitting takes around [X] minutes.

The LED matrix runs variable from warm to white and shifts while you ride. Warm light cuts back-glare in fog, dust and heavy rain, where cold white bounces straight back at you; switch to white when you want distance and detail on an unlit road. Flood and DRL modes blend white into a bright amber flood for daylight running, because amber reads as a vehicle to drivers at junctions, which is where bikes get missed. Fog Mode drops the beam low, warm and wide, putting light on the road surface and verges rather than into the wall of water in front of you. Marshalling Mode gives a distinct flash and colour pattern for riding in formation or holding position at an event, so the rider behind knows which light is yours.

Most auxiliary lights fix your colour temperature at the factory. The Radial7 blends warm and white across the LED matrix while you ride, so you can match the beam to the conditions instead of the other way round. White for distance and detail on a dry road, warm when fog, dust or spray turns cold light into glare. Adjusted from the cockpit, no filters, no stopping.

The Radial7 is built to run on a HEX Innovate ezCAN. The ezCAN plugs into your bike's CAN bus and reads your existing switchgear, so brightness, mode and flash behaviour are all set from the bars with no relay, no switch pod and no wires cut. Because the ezCAN dims in fine increments rather than stepping between presets, you can trim output to the exact level a road, a group ride or an oncoming car calls for, then leave it configured that way.

Our lights are configurable to be use with a PWM control unit such as an ezCAN or by 12v switching on the positive wires

CNC machined from billet 6063 aluminium for unparalleled accuracy and refinement. This enables us to machine the parts to exacting high tolerances, especially the refined cooling features. All unnecessary weight is removed. These high efficiency cooling features rapidly dissipate the heat generated by the high-powered LED’s and electronics,

The aluminium bodywork is hard anodised to produce a ceramic aluminium oxide surface that is extremely tough and durable. This is superior to any painted or normal anodised surfaces. offering outstanding resistance to wear and corrosion

All lights benefit from our patented Intelligent Thermal Management (ITM) technology, which actively protects the system from overheating. In situations where airflow is minimal, such as when a vehicle is stationary, output is automatically reduced to maintain safe operating temperatures This could occur if the vehicle is static for a period of time, so that the cooling air flow if minimal. In this situation the power will be reduced. As soon as airflow is restored, the system immediately detects the improved cooling and returns the light to full output within seconds.

To maintain maximum beam efficiency over time, we use toughened glass for the front lenses, obviating the performance degradation to which plastic lenses are susceptible.

We utilise the tried and tested super seal connectors for all light connections

Engineered for durability, the IP69K-rated construction shields against harsh conditions including the world famous DAKAR Rally, making it ideal for extreme environments

Built tough, ready for the journey

We offer a 7 year warranty on all of our AutoMoto lights and the LED’s inside are covered by a lifetime guarantee! Ensuring peace of mind with every purchase. 

1 2 3
EX2 AutoMoto Light (Single Light)
EX2 AutoMoto Light (Single Light)

EX2 AutoMoto Light (Single Light)

2200 Lumens
£195.00 GBP
£195.00 GBP
1
EX4 AutoMoto Light (Single Light)
EX4 AutoMoto Light (Single Light)

EX4 AutoMoto Light (Single Light)

4300 Lumens
£270.00 GBP
£270.00 GBP
2
Radial 3 Adventure AutoMoto Light (Clear)
Radial 3 Adventure AutoMoto Light (Clear)

Radial 3 Adventure AutoMoto Light (Clear)

3580 Lumens
£235.00 GBP
£235.00 GBP
3

Got a question?

We're here to help. Check out our FAQs, or contact us. We're always happy to assist.

Do you ship internationally?

Yes, we ship orders worldwide. You can see our shipping rates at checkout, or see our delivery information by clicking here.

What's your returns policy?

Returned items must come back in saleable condition. We aren't able to accept returns on items that have been used. For more info, please see our returns policy.

Is there a warranty on your products?

All of our bike lights come with a 2-year warranty as standard - or 3 years when purchased directly from our website. AutoMoto lights are covered by a 7-year warranty, and our LEDs carry a lifetime warranty. See our warranty page for more information.

EXPOSURE LIGHTS

Own the night